Using the Timers
Continued
There are three timers available — Daily Timer, Recording Timer, and Sleep Timer.
Before using the timers, you need to set the clock built in the unit. (See page 10.)
Using Daily Timer
With Daily Timer, you can wake to your favorite music or radio program. You can set the timer whether the unit is on or off (on standby).
How Daily Timer actually works
The unit automatically turns on, set the volume level to the preset level, and starts playing the specified source when the
The Daily timer works everyday automatically. If you do not want to use the Daily timer, turn off the Daily timer. (See “To turn on or off Daily Timer after its setting is done” on the next page.) The timer setting remains in memory until you change it.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
•You cannot use Daily Timer on DVD discs.
•To correct a
CANCEL/DEMO.
On the unit ONLY:
1 Press CLOCK/TIMER repeatedly until “DAILY” appears on the display.
indicator lights up and DAILY (Daily Timer) indicator also starts flashing on the display.
•Each time you press the button, the timer setting modes change as follows:
DAILY ON TIME REC
(Daily timer setting)
Canceled |
| Clock |
| ON TIME |
|
| |||
|
| setting | (Recording | |
| (The hour digits | timer setting) | ||
| start flashing.) |
|
2 Press CLOCK/TIMER again.
“ON TIME” appears for 2 seconds on the display, then the unit enters
–Make sure that a TV is set to turn on at the setting time and the correct input mode is selected.
–Make sure there is a disc on the selected disc number tray.
•When using an Audio CD as the source to play —–Make sure there is a disc on the selected disc number tray.
•When using a tape as the source to play —–Make sure that a tape is in the deck whose deck indicator (A or B) is lit on the display.
–Make sure that the tape direction is correct.
•When using tuner as the source to play —–Set the preset stations.
•When using the external component as the source to play —
3 Set the on-time you want the unit to turn on at.
1)Turn 4/ ¢ to set the hour, then press SET.
2)Turn 4/ ¢to set the minute, then press SET.
“OFF TIME” appears for 2 seconds
on the display, then the unit enters
4 Set the
1)Turn 4/ ¢ to set the hour, then press SET.
2)Turn 4/ ¢to set the minute, then press SET. The unit enters source selecting mode.