JVC MX-DVA9 manual 12, Creating Your Own Sound Modes —ManualMode, Adjust the SEA pattern

Boosts low and high frequency. Good for acoustic music.

Good for vocal music. Good for classical music.

D.CLUB*: Increases resonance and bass.

HALL*: Adds depth and brilliance to the sound.

STADIUM*: Adds clarity and spreads the sound, like in an outdoor stadium.

SEA (Sound Effect Amplifer) modes:

ROCK:

POP:

CLASSIC:

Manual modes:

MANUAL 1/2/3:

Your individual mode stored in memory. See “Creating Your Own Sound Modes—Manual Mode.”

OFF: The sound mode is canceled. The SOUND MODE indicator goes off.

*Surround elements are added to the SEA element to create a being-there feeling in your room.

When one of these modes is selected, the SOUND MODE

indicator lights up as —

While one of the SEA modes (including manual modes) without surround elements is selected, the SOUND MODE indicator lights up as —

Current level appears.

3 Adjust the SEA pattern.

1) Turn 4/ ¢to select the frequency range to adjust (LOW, MID or HIGH).

2) Press Áor 1 to adjust the level (–3 to +3) of the selected frequency range.

3) Repeat steps 1) and 2) to adjust the level of the other frequency ranges.

4 Press SET again.

Creating Your Own Sound Modes —Manual Mode

You can create SEA patterns to suit your preference. These changed settings can be stored in the MANUAL 1, MANUAL 2, and MANUAL 3 modes.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the unit ONLY:

1 Select one of the preset sound modes.

•If you want to add the surround elements in your SEA pattern, select one of the sound modes (D.CLUB, HALL, or STADIUM) before starting the procedure below. (See “Selecting the Sound Modes” on page 11.)

2 Press and hold SET until “SEA CONT” appears on the display.

Ex.: When “D.CLUB” is selected as the sound mode.

5 Turn 4/ ¢to select one of the MANUAL 1, MANUAL 2, and MANUAL 3 modes into which you want to store the

SEA pattern.

6 Press SET.

The SEA pattern you have created is stored into the MANUAL mode selected in step 5.

To use your own sound mode

Select MANUAL 1, MANUAL 2, or MANUAL 3 mode. See “Selecting the Sound Modes” on page 11.

When you unplug the AC power cord or if a power failure occurs

The setting will be erased in a few days. If this happens, set the manual sound modes again.

– 12 –