JVC MX-DVA9 manual Changing the Initial Language Settings, Changing the Various Audio Settings

Changing the Initial Language Settings

On LANGUAGE menu, you can select the following initial languages.

Changing the Various Audio Settings

On AUDIO menu, you can change the following sound settings.

MENU LANGUAGE		ENGLISH
AUDIO LANGUAGE		ENGLISH
SUBTITLE
		ENGLISH
ON SCREEN LANGUAGE
		ENGLISH
			EXIT
	PRESS KEY

DIGITAL AUDIO OUTPUT		STREAM/PCM
DOWN MIX		OFF
COMPRESSION
		OFF
SPEAKER SETTING
		5.1CHANNEL
			EXIT
	PRESS KEY

• MENU LANGUAGE : Select the DVD menu language.

Selectable languages—ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN, ITALIAN, JAPANESE, AA – ZU. (Language code: see page 46.)

•AUDIO LANGUAGE : Select the initial language for audio sound language.

Selectable languages—ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN, ITALIAN, JAPANESE, AA – ZU. (Language code: see page 46.)

• SUBTITLE	: Select the initial language for
	subtitles.

Selectable languages—ENGLISH, SPANISH, FRENCH, CHINESE, GERMAN, ITALIAN, JAPANESE, AA – ZU. (Language code: see page 46.)

•ON SCREEN LANGUAGE :

Select the language for the on- screen menus and indications.

Selectable languages—ENGLISH, ESPAÑOL (Spanish), FRANCAIS (French)

NOTICE: The original language will be selected as the initial language regardless of your setting in the following cases.

–If the language you have selected is not recorded on the disc.

–If the disc is programed to be played back in the original language.

•DIGITAL AUDIO OUTPUT :

Set the output signal type through the OPTICAL DIGITAL OUTPUT terminal. (For the output signal types, see page 45.)

– Select STREAM/PCM“” when connecting an amplifier or a decoder compatible with DTS and Dolby Digital.

–Select PCM“ ONLY” when connecting a digital recording device such an MD recorder, DAT deck, etc.

–Select DOLBY“ DIGITAL/PCM” when connecting an amplifier or a decoder compatible only with Dolby Digital.

•DOWN MIX :

Set the output signal type through the AUX OUT jacks while playing Dolby Digital 5.1ch software.

–Select L“ 0/R0” to output left front and right front channels (2ch) without mixing.

–Select L“ t/Rt” to mix multichannel signals into left front and right front channels (surround signals are added to left/right front channels), then output.

•The PRO LOGIC lamp lights up while down-mix signlas are output through the AUX OUT jacks.

–Select OFF“ ” not to mix but to output original signals.

•COMPRESSION :

Compress the dynamic range (difference between the maximum and minimum sound levels) while playing a source encoded with Dolby Digital. This is useful when listening at a low volume level.

–Select ON“ ” to apply dynamic compression.

–Select OFF“ ” not to apply dynamic compression (full dynamic range recorded on the original disc.)

•SPEAKER SETTING :

Set the speaker’s output level and delay time according to your speaker setting in your listening room. (See the next page.)

–Select 5“ .1CHANNEL” if all the speakers are located at the same distance from the listening position.

–Select EXPERT“ ” if you cannot locate all the speakers at the same distance from the listening position. Select “EXPERT” to enter EXPERT SPEAKER SETTING menu, then press ENTER.

– 33 –