JVC MX-DVA9 manual Basic Disc Playback, Loading Discs, Common Basic Disc Operations, DVD Playback

Basic Disc Playback

Continued

This unit cannot accept any disc operations while reading disc contents.

Loading Discs

On the unit ONLY:

1 Press 0for the disc tray (DVD1, DVD2, or DVD3) you want to load a disc onto.

The unit automatically turns on and the disc tray comes out.

2 Place a disc correctly on the circle of the disc tray, with its label side up.

CORRECT INCORRECT

•When using a single disc (8 cm), place it on the inner circle of the disc tray.

3 Press the same 0you have pressed in step 1.

The disc tray closes, and the corresponding disc number lamp and disc indicator light up on the display.

VCD/CD playback sequence during Continuous play

When 3 VCDs or CDs are loaded on the disc trays, they are played in one of the following sequences.

•When DVD1 is pressed : DVD1 ] DVD2 ]DVD3 (then stops)

•When DVD2 is pressed : DVD2 ] DVD3 ]DVD1 (then stops)

•When DVD3 is pressed : DVD3 ] DVD1 ]DVD2 (then stops)

*When only 2 VCDs or CDs are loaded, they are played in the same order, but the disc tray without a disc is skipped.

*This function cannot be used for VCD with the PBC function and DVD.

Common Basic Disc Operations

While playing a disc, you can do the following operations.

To exchange discs during playback of another

Press 0corresponding to a disc, not playing or selected currently, to eject and exchange the disc.

If you exchange discs during play, the current play will not stop.

To stop play for a moment

Press DVD 3´8(or 8on the remote control).

While pausing, the elapsed playing time flashes on the display.

To resume playing, press DVD 3´8again (or press DVD 3 on the remote control).

4 Repeat steps 1 to 3 to place other discs.

When loading more than one disc continuously

When you press 0for the next tray you want to place another disc onto, the first disc tray automatically closes and then the next tray comes out.

About the disc indicators

Each disc indicator corresponds to the disc tray of the same number.

Disc number

Disc indicator

Disc marker

•The disc marker lights up for the disc number you have selected.

•The disc indicator rotates while the corresponding disc is being played.

•The disc indicator goes off when the unit has detected that there is no disc on the corresponding disc tray.

DVD Playback

•To play back a VCD or CD see page 18.

•Playback will stop when a disc menu appears on the TV screen. If a menu appears while playing, see “Menu-

Driven Playback—DVD/VCD with PBC Function” on page 20.

1 Load discs.

2 Select the disc number button you want to

play.
On the unit:
Press one of the disc number
buttons (DVD1, DVD2, or
DVD3)
On the remote control:
Press one of the disc
number buttons	+
(DVD 1, DVD 2, or
DVD 3) while
holding down SHIFT.

The unit starts reading the disc contents and “DVD” is shown on the display. Then the total title number appears.

•Playback starts from the first chapter of the first title and the disc number lamp starts flashing.

– 16 –