Continued
To connect a center speaker and rear speakers
By connecting a center speaker and rear speakers to the SURROUND SPEAKERS jacks, you can enjoy Dolby Digital multichannel sound and the DSP Surround modes (see page 28).
| Center |
| speaker |
SURROUND SPEAKERS | |
REAR | CENTER |
RIGHT LEFT |
|
CAUTION: |
|
IMPEDANCE | |
16 | 32 |
Right rear | Left rear |
speaker | speaker |
•Connect the right rear speaker to the REAR RIGHT jack.
•Connect the left rear speaker to the REAR LEFT jack.
•Connect the center speaker to the CENTER jack.
To connect a subwoofer
By connecting a subwoofer, you can reproduce the LFE signals recorded in Dolby Digital 5.1ch multichannel software.
| Powered |
SUB- | subwoofer |
WOOFER | |
5.1ch OUT | (not supplied) |
|
|
To input
Connect the input jack of a powered subwoofer to the SUB- WOOFER 5.1ch OUT jack, using a monaural audio cord (not supplied).
Ideal Speaker Layout
To enjoy Dolby Digital 5.1 ch multichannel sound, locate speakers as follows. If you cannot locate them like this, adjust the speaker setting by using the
Center speaker
Connecting Other Equipment
You can connect both analog and digital equipment.
• DO NOT connect any equipment while the unit is on.
•DO NOT plug in any equipment until all connections are complete.
To connect an analog component
Be sure that the plugs of the audio cords are colored: White plugs and jacks are for left audio signals, and red ones for right audio signals.
Audio
equipment
To audio output
For playing the other equipment through this unit,
connect between the audio output jacks on the other equipment and the AUX IN jacks by using audio cords (not supplied).
Audio
equipment
To audio input
For recording sounds through this unit on the other
equipment, connect between the audio input jacks on the other equipment and the AUX OUT jacks by using an audio cord (not supplied).
•See “About sounds output through the rear terminals” on the next page.
Left
front speaker
30˚
90˚
Left rear speaker
Right
front speaker
Subwoofer
30˚
90˚
Right rear speaker