Continued
On the remote control:
1 Load discs.
•If the current playing source is not the DVD/VCD/CD player press DVD 3, then 7before going to the next step.
2 | Press PLAY MODE. |
| The play mode screen appears on the TV. |
3 | Press CONTROL + or − to |
| move to “PROGRAM,” |
| then press ENTER. |
The program screen appears.
•If a program has been stored in memory, the program is called up.
• You cannot select “PROGRAM” during Random play,
REPEAT | PROGRAM | RANDOM |
| ||
1 | 2 | 3 | 4 | 5 | 6 |
7 | 8 | 9 | 10 | 11 | 12 |
13 | 14 | 15 | 16 | 17 | 18 |
4 Press one of the disc number buttons (DVD 1, DVD 2 or DVD 3) you want to program while holding down SHIFT .
The selected disc number is shown on the TV screen.
+
5 Press the number buttons to enter a title or track number you want to program.
The selected title or track number is shown on the TV screen.
•To select number 5, press 5.
•To select number 10, press 10.
•To select number 20, press +10 then 10.
•To select number 23, press +10, +10 then 3.
Selected title or track number
Selected disc number
6 To program another title or track from the same disc, repeat step 5.
To program another title or track from a different disc, repeat steps 4 and 5.
Each time you select a title or track, the program item is added up to 18 steps.
REPEAT | PROGRAM | RANDOM |
| ||
1 | 2 | 3 | 4 | 5 | 6 |
7 | 8 | 9 | 10 | 11 | 12 |
13 | 14 | 15 | 16 | 17 | 18 |
7 Press DVD 3.
The titles and tracks are played in the order you have programed.
To stop playing, press 7.
To go to the next track, press ¢.
Even if you press 4
It just goes back to the beginning of the current title or track, but cannot go back to the previous titles or tracks.
To modify the program
You can modify the program before or after playing.
To erase the last steps, press CANCEL while holding down
SHIFT.
•Each time you press the button, the last programmed step is erased from the program.
To add steps in the program before playing, simply select the disc and title/track numbers you want to add by following steps 4 to 6 of the programming procedure.
To erase program completely, press CLEAR when the
playback is stopped.
The program you have made will be also erased,
•when you eject all the discs.
•when you unplug the AC power cord.
•when a power failure occurs.
To exit from Program play mode, press PROGRAM on the unit after playing. The PRGM (program) indicator goes off. The program you have made is memorized.
To check the programed contents
Press PLAY MODE. The programed contents appear on the TV screen.
To erase the play mode screen, press PLAY MODE. The program you have made is memorized.
