Pelco Installation Manual C1487M-H (1/01) 19
SPECIFICATIONS
MECHANICAL
Construction
Back box: Aluminum
Dome drive: Aluminum, ABS plastic
Lower dome: Acrylic
Cable Entry
In-Ceiling: .75-inch (1.91 cm) conduit fitting
Pendant: Through 1.5-inch (3.81 cm) NPT pendant mount
Pan Movement: 360° continuous pan rotation
Vertical Tilt: Unobstructed +2° to -92°
Manual Pan/Tilt Speeds*
Pan
Spectra II: 0.1°-80°/sec manual operation, 150°/sec turbo
Spectra Lite: 0.5°-80°/sec manual operation, 150°/sec turbo
Tilt
Spectra II: 0.1°-40°/sec
Spectra Lite: 0.5°-40°/sec
Preset Speeds
Pan: 250°/sec
Tilt: 200°/sec
*For variable-speed operation an appropriate controller is required. With fixed-speed controllers, Spectra II and Spectra Lite pan/tilt
speed is 24°/sec. The CM6700 controller with the KBD200 keyboard has programmable fixed speeds.
ELECTRICAL
Input Voltage: 18-30 VAC, 24 VAC nominal
Input Power
In-ceiling: 30 vA
Indoor pendant: 30 vA
Outdoor pendant: 75 vA
Fuse: 1.6 A
Relay Contacts AUX 1 AUX 2 Output
Type: Form C Open collector transistor output
Voltage: Low voltage (<40 V) 32 VDC maximum
Current: 2 A maximum 150 mA maximum
GENERAL
Environment
In-Ceiling: Indoor only
Pendant: Indoor/outdoor
Operating Range
In-Ceiling: 32° to 140°F (0° to 60°C) intermittent operation; 32° to 122°F (0° to 50°C) continuous operation
Pendant
Without Heater: 32° to 140°F (0° to 60°C) absolute maximum operating temperature; 32° to 122°F (0° to 50°C) sustained
maximum operating temperature
With Heater: (Assumes no wind chill factor; for detailed test conditions, contact Pelco.)
Maximum operating temperature: 140°F (60°C) absolute maximum; 122°F (50°C) sustained maximum
Minimum operating temperature: -60°F (-51.11°C) absolute minimum; minimal icing at -50°F (-45.56°C)
sustained minimum; prevents icing at -40°F (-40°C) sustained minimum; de-ices .1 inch (2.5 mm) within 3
hours after power-up