Pelco C1566M-C, C1572M , Insert or Replace a Rear Panel Monitor BNC Card (CM9780-RPM)

18 C1566M-C (10/05)
When looping video out to another device (such as a DVR, VCR, or switcher), set the termination jumpers on the CM9780-DFC cards to the
unterminated position.
Figure 9. DFC Card
Insert or Replace a Rear Panel Monitor BNC Card (CM9780-RPM)
1. Slide the monitor BNC card into the card guides at the rear of the bay. From the rear of the bay, the slot at the far left provides the
connection point for the primary monitor output card inserted in the front of the bay into slot 18.
2. Push the BNC card into place firmly.
NOTE: Each monitor BNC card (CM9780-RPM) provides 16 monitor output connections and connects to one monitor output card
CM9780-VMC). The CM9780-MXB can hold two monitor output cards, for a total of 32 monitor outputs.
INPUT FROM CM9700-VPP
PATCH PANEL – CONNECTOR A
INPUT FROM CM9700-VPP
PATCH PANEL – CONNECTOR B
JP16 JP15 JP14 JP13 JP12 JP11
JP10 JP9 JP8 JP7 JP6 JP5 JP4 JP3 JP2 JP1
JP32 JP31 JP30 JP29 JP28 JP27 JP26 JP25 JP24 JP23 JP22 JP21 JP20 JP19 JP18 JP17
TERMINATED
UNTERMINATED
123
TERMINATED
UNTERMINATED