Pelco C1566M-C, C1572M Installation

8 C1566M-C (10/05)

Installation

UNPACKING

1. Unpack and inspect all equipment, and verify delivery according to the packing slip. Before shipping, Pelco connects, tests, and programs

each system according to the individual sales order. Contact Pelco immediately if there is any discrepancy in the equipment that you

receive.

CM9700-CC1

The following items are supplied with the CM9700-CC1:

• 1 CM9700-CC1 unit, with front rack ears installed

• 1 120 VAC, 60 Hz power cord (USA standard)

• 1 230 VAC, 50 Hz power cord (European standard)

• 1 Keyboard, PS/2

• 1 PS/2-to-AT keyboard adapter

• 1 RCA-to-BNC adapter

• CM9700 Resource CD (includes the CM9700-MGR software)

• BNC extraction tool

• 2 Brackets with a set of 6 screws, 8-32 x 0.250-inch, pan head

• 2 Adjustable support rail sets (each set includes 1 front-mounting rail and 1 rear-mounting rail), with the following sets of screws

– 6 Screws, 8-32 x 0.375-inch, pan head with washers

– 12 Screws, 10-32 x 0.375-inch, ﬂat head

– 4 Screws, 10-32 x 0.750-inch, Phillips, pan head with washers

– 6 Screws, 8-32 x 0.250-inch, Phillips, pan head

CM9780-MXB

The following items are supplied with the CM9780-MXB:

• 1 CM9780-MXB matrix bay

• 1 CM9780-MXB mounting bafﬂe, with front and rear rack ears installed

• 2 Rackmount ears with screws to mount on the matrix bay

• 1 120 VAC, 60 Hz power cord (USA standard)

• 1 230 VAC, 50 Hz power cord (European standard)

• 1 RJ-45 reversed data cable

• 1 Sheet of camera number labels (these can be afﬁxed to the BNC cards to correspond to camera input numbers)

• 16 Screws and washers for mounting the bay

CM9700-VPP

The following items are supplied with the CM9700-VPP:

• 2 Downframe cables

• 4 Phillips panhead screws

• 4 Nylon washers

CM9700-VPP-RK

The following items are supplied with the CM9700-VPP-RK:

• 2 Cable brackets

• 1 Blank panel

• 16 Phillips panhead screws (stainless steel)

• 16 Phillips panhead 4-inch screws (black)

• 16 Nylon washers

2. Keep all manuals and cabling with their associated equipment.

3. Locate the following documents:

• The System 9780 Port Assignments Sheet. This document contains speciﬁc information about your system. All System 9780s are

preprogrammed based on your system order.

• System 9780 manual binder.

NOTE:

The appropriate number of CM9780-VCC cards (camera cards), CM9780-VMC cards (monitor cards), and associated rear panels are

added to your system according to your system order.