40 C1566M-C (10/05)
Operation
A brief description of System 9780 operation is provided here.

OPERATING YOUR SYSTEM 9780

System 9780 can be operated with a CM9760-KBD or KBD300A keyboard. Operation instructions are provided below, but you should become
familiar with the detailed instructions provided in the appropriate keyboard manual.

Switch Monitors

If you select a restricted monitor, the monitor does not switch; the keyboard LED displays the previously selected monitor number.
1. Enter the monitor number.
2. Press the MON key. The keyboard LED displays the selected monitor number.

Select Cameras

If you select a restricted camera view, the camera view does not appear on that monitor. The previously selected, unrestricted camera view
remains on the monitor.
1. Enter the camera number.
2. Press the CAM key.
OR
Press the PREV or NEXT key to scroll through the available cameras.

Control Receivers

Select a suitable camera and operate a PTZ function.
Pan/Tilt /Zoom
Move the joystick until the camera reaches the desired position. To increase the speed of movement, move the joystick farther from center or
press the T key to pan at turbo speed. Twist the joystick clockwise to zoom in, counterclockwise to zoom out. Or use the IN/OUT key to zoom in or
out.
Lens Control: Focus, Iris
Use the NEAR/FAR key to focus near or far. Use the OPEN/CLS key to open or close the iris.

Call a Preset

1. Enter the preset number.
2. Press the Prst/Lock key, or select the PRST icon.
Power-up the system. Refer to the System Start-Up section.
Switch monitor. Enter the monitor number.
Press the MON key.
Select camera. Enter the camera number.
Press the CAM key.
Control PTZ receivers. Use the appropriate PTZ control keys or joystick (depending on the keyboard used).
Call a preset.
Program the preset through the keyboard.
Enter the preset number.
Press the PRESET key or Prst/Lock key (depending on the keyboard used).
System does not function. Refer to the Troubleshooting section.