16 Pelco Manual C1927M (5/99)Table B. Front Panel Controls
Button Operation Function
DISPLAY/ Press once Toggles main monitor display between record, live inputs, and playback from VCR.
RECORD In the RECORD mode, the red LED lights.
Press for 3 seconds Displays or exits the record setup menu on the main monitor.
CAMERA Press once Switches the selected camera to the main monitor (record, live, or playback).
Press twice Switches the selected camera to the spot monitor (live only).
Press for 3 seconds Displays or exits the camera setup menu on the main monitor.
SEQUENCE Press once Initiates or stops sequence on the main monitor.
Press twice Initiates or stops sequence on the spot monitor.
Press for 3 seconds Displays or exits sequence setup menu on the main monitor.
VIEW Press once In RECORD mode shows the multiplexed output to the VCR. Press again to exit.
In VCR mode shows the multiplexed input from the VCR. Press again to exit.
Press twice Displays alarm log on the main monitor.
Press twice Clears the alarm list and closes the log.
Press once Exits the alarm log without clearing the alarm list.
Press for 3 seconds Displays or exits system setup menu on the main monitor.
Press once Enables 2X zoom on displayed camera.
Press the button a second time for 4X zoom.
Press the button a third time to exit.
Press once Displays on the main monitor a picture-in-picture insert on top of full-screen
display.
Press button again to exit.
Once in the PIP mode, press for three seconds to enter the programming mode.
Press once Displays a group of four cameras on the main monitor.
Repeat pressing the button to display other groups.
Press for 3 seconds Enables programming mode to select four groups of four cameras to
display on the main monitor.
Press once Displays a group of nine cameras on the main monitor.
Press button again to display second group (16-channel models only).
Press for 3 seconds Enables programming mode to select two groups of nine cameras to
display on the main monitor.
(16-channel Press once Displays all 16 cameras on the main monitor.
models only) Press for 3 seconds Enables programming mode to select the order of 16 cameras to display on
the main monitor.
(Does not work
in RECORD or
VCR modes)
(Does not work
in RECORD
mode)
(Does not work
in RECORD
mode)
(Does not work
in RECORD
mode)
(Does not work
in RECORD
mode)