6 C2410M-I (1/06)
Installation
INSTALL BACK BOX
MOUNTING DIRECTLY TO A WALL OR CEILING
1. Cut a hole 3.5 inches (9 cm)
in diameter in the ceiling or
wall using the adapter plate
as a template.
2. Connect the video cable.
3. Connect the power wires.
• For 12 VDC, connect the
24 VAC/12 VDC (red) and
GND (black) wires to
input power. The blue
wire is not used.
• For 24 VAC, connect the 24 VAC/12 VDC (red) and 24 VAC (blue) wires to input power.
The black wire is not used.
4. Attach the back box to the wall or ceiling.
MOUNTING TO 4S DEEP ELECTRICAL BOX
1. Attach adapter plate to the
4S box with the two 8-32 x
0.750-inch screws.
2. Connect the video cable.
3. Connect the power wires.
• For 12 VDC, connect
the 24 VAC/12 VDC
(red) and GND (black)
wires to input power.
The blue wire is not
used.
• For 24 VAC, connect the 24 VAC/12 VDC (red) and 24 VAC (blue) wires to input power.
The black wire is not used.
4. Attach the back box to the adapter plate with the four 8-32 x 0.375-inch screws.
MOUNTING
HARDWARE
(NOT SUPPLIED) BACK BOX
WALL OR
CEILING
MOUNTING DIRECTLY TO
WALL OR CEILING
8.32 X .750 SCREW
(SUPPLIED)
8.32 X .375 SCREW
(SUPPLIED)
WALL OR
CEILING
ADAPTER PLATE
BACK BOX
4S DEEP
ELECTRICAL
BOX
MOUNTING TO 4S DEEP ELECTRICAL BOX