C2444M-C (1/04) 19
AUTO SHARPNESS
Auto sharpness enhances picture detail by increasing the aperture gain of the camera and
sharpening the edges in the picture.
There are two settings:
ON (default) - The camera automatically maintains a normal sharpness mode.
OFF - The sharpness of the picture is set manually by programming the SHARPNESS LEVEL.
Sharpness level settings range from 0-31.
AUTO WHITE BALANCE
This feature automatically processes the viewed image to retain color balance over a color
temperature range. The default setting for auto white balance is ON.
R GAIN - Adjusts the picture output in the red range. As you change the value, you will
see the color change on your monitor.
B GAIN - Adjusts the picture output in the blue range. As you change the value, you will
see the color change on your monitor.
BACK
EXIT
ADVANCED SETTINGS
SHUTTER SPEED AUTO
AGC LIMIT 27
AUTO IRIS AUTO
AUTO IRIS LEVEL 66
AUTO IRIS PEAK 8
AUTO SHARPNESS ON
SHARPNESS LEVEL 26
AUTO WHITE BALANCE ON
R GAIN 482
B GAIN 678
BACKLIGHT COMP OFF
VIDEO LEVEL HIGH
BACK
EXIT
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<ALERT>*
<CLEAR>
<PASSWORD>
DOME SETTINGS
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
(See page 9)
Quick Programming Guide
BACK
EXIT
TYPE OF LIGHTING OUTDOOR
AUTO FOCUS ON
ZOOM LIMIT X176
ZOOM SPEED MEDIUM
LOW LIGHT LIMIT 2
<ADVANCED SETTINGS>
CAMERA
*This setting only applies to Pressurized
Spectra III SE dome systems with
software version 1.25 or higher.