22 C2444M-C (1/04)
PARK TIME
This feature allows the dome to begin a specified operation (scan, preset, or pattern) after a
programmed time of inactivity.
Park time can be programmed from 1 minute to 720 minutes (12 hours), or set to zero, which
disables this feature. The default setting is zero.
Park Action
This feature will define the activity when the dome parks. The following settings are
available:
NONE (default) - No action.
AUTO SCAN - Dome starts auto scan operation.
RANDOM SCAN - Dome starts random scan operation.
FRAME SCAN - Dome starts frame scan operation.
PRESET 1 - Dome goes to preset 1.
PRESET 8 - Dome goes to preset 8.
PATTERN 1 - Dome runs pattern 1.
PATTERN 2 - Dome runs pattern 2.
PATTERN 3 - Dome runs pattern 3.
PATTERN 4 - Dome runs pattern 4.
BACK
EXIT
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<ALERT>*
<CLEAR>
<PASSWORD>
DOME SETTINGS
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
MOTION
AUTO FLIP ON
PROPORTIONAL PAN ON
PARK TIME (MINUTES) 0
PARK ACTION NONE
SCAN SPEED (DEG/S) 25
PRESET FREEZE FRAME AUTO
LIMIT STOPS ON
<SET MANUAL STOPS>
<CLEAR MANUAL STOPS>
<SET SCAN STOPS>
<CLEAR SCAN STOPS>
<SET AZIMUTH ZERO>
<CLEAR AZIMUTH ZERO>
BACK
EXIT
REFERENCE INFORMATION
MANUAL LIMITS SET NO
SCAN LIMITS SET NO
* This setting only applies to
Pressurized Spectra III SE dome
systems with software version
1.25 or higher.