26 C2444M-C (1/04)
<Power Up>POWER UP ACTION
This setting defines a specific activity (scan, preset, pattern) to be performed in the event the
power to the dome is cycled.
The following settings are available:
NONE - No action.
AUTO (default) - The dome resumes its prior activity or direction before the power outage.
AUTO SCAN - Dome starts auto scan operation.
RANDOM SCAN - Dome starts random scan operation.
FRAME SCAN - Dome starts frame scan operation.
PRESET 1 - Dome goes to preset 1.
PRESET 8 - Dome goes to preset 8.
PATTERN 1 - Dome runs pattern 1.
PATTERN 2 - Dome runs pattern 2.
PATTERN 3 - Dome runs pattern 3.
PATTERN 4 - Dome runs pattern 4.
BACK
EXIT
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<AUX>
<ALERT>*
<CLEAR>
<PASSWORD>
DOME SETTINGS
EXIT
SPECTRA III
LANGUAGE ENGLISH
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
BACK
EXIT
POWER UP
POWER UP ACTION AUTO
* This setting only applies to
Pressurized Spectra III SE dome
systems with software version
1.25 or higher.