Pelco c2626M manual Troubleshooting

Troubleshooting

LED indicators on the front and rear panels of the SX8205R module allow you to monitor operational status:

•The Power LED (Pelco badge) on the front panel (refer to Figure 2) allows you to monitor operating power. Refer to Table B for information about the Power LED and associated troubleshooting guidelines.

•LED indicators on the rear panel (refer to Figure 3) allow you to monitor RJ-45 10BASE-T/ 100BASE-TX port status. Refer to Table C for information about the rear-panel indicators and associated troubleshooting guidelines.

Table B. Troubleshooting with Front-Panel Indicator

Indicator Color Meaning Possible Cause Corrective Action

Power LED (Pelco badge)

Blue

Not lit

Power is being	–	No action required.
applied to the
module.
Power is not being	Power connection is faulty.	Check power connection.
applied to the		If module is rack mounted,
module.		reseat module or power
		supply as necessary.
	Power supply has failed.	Replace power supply.
	Loss of power occurs due to	Check circuit breakers, fuses,
	tripped circuit breakers,	or electrical service as
	blown fuses, or faulty elec-	necessary.
	trical service.

C2626M (2/07) 15