Pelco C2669M ACCESSING CAMERA MENUS

C1696M (8/06) 33

3. Move the joystick le ft or right to pan to the left or right of the current scene.

4. Move the joystick up or down to tilt the camera up or down from the current scene.

5. Press and hold the Plus or Minus buttons to zoom in and zoom out of the scene.

If the camera does not respond to the joystick, verify that the camera protocol is configured c orrectly. The DVR5100 supports Coaxitron, Extended

Coaxitron, Pelco D and Pelco P protocols for cameras that are equipped for PTZ control.

ACCESSING CAMERA MENUS

Many settings for different cameras can be programmed to fit your specific needs. You can display menus and adjus t camera settings from the

DVR5100 if your user role has permissions to do so. Although you can program patterns and presets from some camera menus, for best results

use the DVR5100 Remote Client Application to program these operations.

NOTE: The instructions in this manual refer to the DVR5100 Control Pad. An optional KBD5000 keyboard or U SB PC keyboard and mouse also can

be used to operate the DVR5100 instead of the Control Pad. Refer to Understanding DVR Controls and Menus on page 13 for alternate keystrokes

if you any of these devices.

To access a camera menu:

1. In the live view mode, select a video pane that is displaying a camera for which you want to view its on-screen menu. Refer to Viewing a

Specific Camera on page27.

The border of the video pane will be green. If the border is blue, you cannot access the camera me nu. Press Enter/Shift to change the

mode from PTZ mode to live view mode.

2. Press Menu . A DVR5100 menu appears.

Figure 37. Selecting the Camera Menu

3. Navigate to the Cameras menu from the main menu, and then select the Camera Menu icon. The settings menu for the camera appears.

The list of options varies for each camera type. For example, the Figure 38 shows the main men u for a typical camera.

Figure 38. Example of a Camera Settings Menu

WARNING: Among the available menu options are commands to restart or turn off a camera. Restarting or turning off a camer a stops any

video recording that might be in progress for the camera. Check with your system administrator before you restart or turn off a camera that

might be in use by other users on the system.

MAIN MENU

<ZONES>

<AUX>

<ALERT>

<CLEAR>

BACK

EXIT