Pelco C2669M - page 51

C1696M (8/06) 39
3. When the Execute Scri pt dialog box appears, turn the jog (inner dial) to scroll through and select a script from the list (Figure 43).
4. Press the buttons on the Panel Keypad as follows:
• To start a script, press the green function key , or use the joystick to navigate to the Execute icon , and then press Enter/
Shift .
• To stop a script, press the yellow function key , or use the joystick to navigate to the Halt icon , and then press Enter/
Shift . Note that the Halt icon is available only when a script is running.
• To close the dialog box without running a script, press the red function key , or navigate to the Cancel icon , and then
press Enter/Shift .
Figure 43. Execute Script Dialog Box