C1696M (8/06) 45
Activating Auxiliary Commands (Wiper)On cameras that are equipped with a wiper, a preset command is available to activate it from the DVR5100. The DVR5100 ignores the command
if a camera does not support it.
NOTE: The instructions in this manual refer to the DVR5100 Control Pad. An optional KBD5000 keyboard or U SB PC keyboard and mouse also can
be used to operate the DVR5100 instead of the Control Pad. Refer to Understanding DVR Controls and Menus on page 13 for alternate keystrokes
if you any of these devices.
To activate the wiper command:
1. While in live view mode, se lect a video pane that is displaying video from a camera with a wiper. The video pane border is green.
2. From the main menu, select Actions, and then press Enter/Shift . The Action menu appears.
Figure 53. Scripts Menu
3. Select Auxiliary, and then press Enter/Shift .
4. Repeat the command as o ften as necessary. The command is ignored on cameras that do not have a wiper.