![](/images/new-backgrounds/1290951/29095133x1.webp)
MAIN MENU
The following sections describe each menu and the settings associated with that menu. The sample screens in each section show the default settings.
To display the MAIN MENU, complete the following steps:
1.Press and hold the center button on the side of the camera (refer to Accessing the Setup Menus on page 15).
2.Use the Pelco controller to navigate through the menus.
MAIN MENU
PROFILES | |
EXPOSURE SET. | |
FUNCTION SET. | |
SAVE AS CUSTOM | |
PIXEL CORRECTION | |
SYSTEM INFORMATION |
EXIT
Profiles
Select this option to access the camera profile settings (refer to Profiles on page 18).
Exposure Set.
Select this option to configure the exposure settings (refer to Exposure Settings on page 19).
Function Set.
Select this option to configure the function settings (refer to Function Settings on page 21).
Save as Custom
Select this option to configure and save a custom profile (refer to Pixel Correction on page 24).
Pixel Correction
Select this option to perform the automatic pixel correction procedure (refer to Save as Custom on page 24).
System Information
Select this option to display the camera firmware information or to restore the factory default settings (refer to System Information on page 24).
17 |