How to Use the Device Utility
Use the Device Utility software to identify the IP address, check the status of the device, and update firmware.
FIRMWARE VERSION
UPDATE FIELD
CAMERA NAME IP ADDRESS 
MAC ADDRESS
STATUS
REMOVE OFFLINE DEVICES
Figure 10. Pelco Device Utility Software
INSTALLING THE IP110 DEVICE UTILITY
To install the IP110 Device Utility software, complete the following steps:
1.Download the Pelco Device Utility available on the CD shipped with the product.
2.Create a Pelco Device Utility directory on your hard drive.
3.Copy PelcoDeviceUtility.zip to the directory.
4.Click on the PelcoDeviceUtility.zip file. Extract the files.
5.Double click on DeviceUtility.html to open the Device Utility. Wait a few seconds for the software to locate the IP110.
NOTE: You must have the JRE installed on your machine to view the Device Utility. If you get an error message or see an X displayed on the page install JavaSE JRE available on the CD (shipped with the product) or at http://www.java.com/en/download/.
C3433M (3/07) | 15 |
