9760-Graphic User Interface Manual
30
4.2 STARTING THE GRAPHIC CONTROLLER PROGRAM
The Graphic Controller program is started automatically when Windows is started, or double clicking on
the GCON icon in Windows Program Manager can start it. The Log On window (illustrated in figure 4-1)
will appear on the screen when the program has started. Operators must log on before they can operate the
Graphic Controller program.
4.2.1 Log On
A PIN is required to log on to the system. This PIN informs the system which operator is logging on and
what authority they have been allocated (e.g., if an operator has been restricted access to a camera in the
9760 Setup program, they will not be able to control that camera using the Graphic Controller program).
NOTE: For security reasons, each operator is usually assigned an individual PIN. Unless a correct
PIN is entered, the operator will not be able to access the system. If you do not know your PIN,
contact your manager or the security supervisor.
Figure 4-1: Graphic Controller Log On Window
To log on:
1. Start the Graphic Controller program by starting Windows or by double clicking on the Gcon
icon in the Windows Program Manager. The Graphic Controller Log On window (illustrated in Fig-
ure 4-1) will appear.
.
Login
Menu
Option
Control Menu Box
Minimize/Maximize/Close Box
The Enter PIN window will appear when
Log In is selected from the Login menu
PIN number