DOME SETTINGS
Camera
AUTO FOCUS
SPECTRA III
LANGUAGEENGLISH
<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>
ACK ALERT*
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
EXIT
Auto focus allows the lens to remain in focus during
There are two auto focus settings:
ON (default) | If auto focus mode is set to ON, the camera will focus |
| automatically when using pan, tilt, and zoom functions. |
OFF | Focus is operated manually. To focus, press the Focus Far or Focus |
| Near button on the controller. |
DOME SETTINGS
<CAMERA>
<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>
<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD>
BACK
EXIT
CAMERA
AUTO FOCUS | ON |
ZOOM LIMIT | X128 |
ZOOM SPEED | MEDIUM |
LOW LIGHT LIMIT | 2 |
<ADVANCED SETTINGS> |
|
BACK
EXIT
*This setting only applies to Pressurized Spectra III dome systems with software version 1.25 or higher.
ZOOM LIMIT
Zoom limit allows the user to define a limitation on the amount of telephoto zoom. The default setting is 128X.
Cameras with 128X zoom (16X optical zoom and 8X digital zoom) can be set for 16X, 32X, 64X, or 128X.
ZOOM SPEED
Zoom Speed allows the user to define how fast the dome will go from full wide zoom to the 16X optical zoom. The default setting is MEDIUM.
Available settings for zoom speed include the following:
HIGH | 1.9 seconds |
MEDIUM (default) | 3.6 seconds |
LOW | 6 seconds |
NOTE: When using the HIGH setting, the image may be out of focus until zooming stops.
LOW LIGHT LIMIT
Low light limit is the maximum duration, in fractions of a second, that the electronic shutter will remain open in low light conditions. The default setting is 2.
Settings include the following: |
| ||
2 | =1/2 second | 8 = 1/8 second | 30 =1/30 second |
4 | = 1/4 second | 15 =1/15 second | 60 =1/60 second |
Quick Programming Guide
(See page 11)
17 |
