Pelco DD53TC16-X manual Password

Password

SPECTRA III

LANGUAGEENGLISH

<SYSTEM INFORMATION> <DISPLAY SETUP> <DOME SETTINGS>

ACK ALERT*

RESET CAMERA

CYCLE CAMERA POWER

REBOOT SYSTEM

EXIT

DOME SETTINGS

<CAMERA>

<MOTION> <POWER UP> <LINE SYNC> <PRESETS> <PATTERNS> <ZONES>

<TITLE TEXT> <ALERT>* <CLEAR> <PASSWORD>

BACK

EXIT

PASSWORD

ENABLE PASSWORD	OFF
<EDIT PASSWORD>
BACK
EXIT

EDIT THE PASSWORD

----------

1234567890OK

ABCDEFGHIJCANCEL KLMNOPQRST

UVWXYZ.,-/SPACE

abcdefghijBACKSPACE klmnopqrst

uvwxyz#&:*

Spectra III features password protection to prevent unauthorized changes to the dome settings. An operator can open the System Information and Display Setup Screens, but cannot access any of the Dome Settings menus.

Controller/keyboard commands cannot override password-protected settings. If a keyboard is used to set a preset, pattern, or zone, the Enter Password screen appears on the monitor. The password must be entered before programming can continue.

At least one character must be entered to create a valid password.

*This setting only applies to Pressurized Spectra III dome systems with software version 1.25 or higher.

Quick Programming Guide

(See page 11)

C2446M-E (11/05) 35