Pelco DX9100 CONNECTING A CM9760-CC1

80 C634M-D (12/04)

CONNECTING A CM9760-CC1

To connect a CM9760-CC1 to a DX9200 recorder, you must use a CM9760-DT.

1. Connect a null modem cable from the CM9760-DT’s COM A port to the recorder’s COM 1 or COM 2 port.

2. Connect a null modem cable from the CM9760-DT’s COM B port to the COM 1 or COM 2 port on the CM9760-CC1.

3. Set the jumpers in the data translator for baud rate and parity. Refer to the CM9760-DT Installation/Operation manual.

NOTE: You can also connect the CM9760-DT to one of the CM9760-CC1 SERCOM ports for RS-422 communication.

Figure 105. Connecting a CM9760-CC1

NOTE: You do not have to use a CM9760-DT if the CM9760-CC1 has software version 8.0. However, you must set the COM port

on the CC1 as an internal data translator. Refer to the CM9760-CC1 Installation/Operation manual.

12V AC

COM A

COM B 12

CM9760-DT

CM9760-CC1

RS-232 TO RS-422

CONVERTER

NULL

MODEM

CABLE

PRINTER

COM 1

COM 2

NULL

MODEM

CABLE

COM 1

COM 2