Pelco ICS210 manual Auto Iris Level Adjustment, Retighten the locking screw

Models: ICS210

1 20
Download 20 pages 14.14 Kb
Page 13
Image 13
AUTO IRIS LEVEL ADJUSTMENT

AUTO IRIS LEVEL ADJUSTMENT

If you have a varifocal lens or fixed focal length lens with an auto iris, you can adjust the iris level setting to increase or decrease brightness.

FIXED LENS

VARIFOCAL LENS

IRIS LEVEL

ADJUSTMENT

3.Retighten the locking screw.4.Replace the heater board if it was removed. AUTO IRIS LEVEL

ADJUSTMENT

Figure 12. Iris Level Adjustment

FOCUS ADJUSTMENT FOR FIXED FOCAL LENGTH LENS WITH AUTO IRIS

To adjust the focus, do the following:

1.Loosen the locking screw on the bottom of the lens. To loosen the screw, it may be necessary to remove the heater board. Refer to Figure 14 and the accompanying steps.

FOCUS

ADJUSTMENT

SCREW

ADJUSTMENT

SLOT

BOTTOM VIEW OF CAMERA WITH

HEATER BOARD REMOVED

Figure 13. Focus Adjustment

2.Move the screw in the slot to bring the picture into focus.

3.Retighten the locking screw.

4.Replace the heater board if it was removed.

5.Reconnect the four-pin heater connector if you are using the heater.

C2491M-D (8/06)

13

Page 13
Image 13
Pelco ICS210 manual Auto Iris Level Adjustment, Retighten the locking screw, Replace the heater board if it was removed