Pelco IS110 manual Specifications, General, Electrical, Video, Environmental

Specifications

GENERAL
Pan/ Tilt Adjustment	Manual
Pan	360°
Tilt	80° (20° to 100° range)
Rotation	360°
Construction	Aluminum with steel camera mounting bracket and polycarbonate
	dome
Impact	IS110 is a rugged product that exceeds an IK10++ rating of
	Standard EN62262 and can withstand up to 100J in a vertical
	impact
Cable Entry	1, 0.75-inch (1.91 cm) NPT threaded opening on side;
	2, 0.75-inch (1.91 cm) openings on base
Finish	Gray polyester powder coat
Light Attenuation
Smoked	f/1.5 light loss
Clear	Zero light loss
Unit Weight	2.2 lb (1.0 kg)
ELECTRICAL
Input Voltage*	12 VDC or 24 VAC (±10%), autosensing
Synchronization	Internal or AC line lock
Power Consumption
Camera	< 3 W (DW/CW models)
	< 4 W (DN/CH models)
Heaters	10 W when active, thermostatically controlled

*24 VAC power is recommended when installing any Camclosure integrated camera system under fluorescent lighting conditions.

VIDEO
Signal System	NTSC or PAL
Video Output
Composite	1 Vp-p (75 ohms)
UTP	1 Vp-p (100 ohms)
Video Connectors	1 composite BNC and 1 UTP
Service Connector	3-conductor, 2.5 mm connector for video output to optional
	IS-SC cable
ENVIRONMENTAL
Environment	Low temperature, indoor/outdoor
Operating Temperature	-50° to 122°F (-46° to 50°C); de-ices to 25°F (-4°C)
Thermostat Operation	Heater is thermostatically controlled to activate ON at
	50°F (10°C) and OFF at 80°F (27°C)

C3426M-E (3/09) 33