Pelco IS310-CH DW/CW Series Wide Dynamic Range Adjustments, SW1-1 Video Format, SW1-2 Line Sync

DW/CW SERIES (WIDE DYNAMIC RANGE) ADJUSTMENTS

Refer to Figure 11 to adjust the IS310-DW or IS310-CW model.

SW1

DEFAULT SWITCH POSITION

R7

Figure 11. Adjusting the IS310-DW/CW Series Camclosure

SWITCH SETTINGS

Locate the DIP switch and then set the switches for your installation.

SW1-1: Video Format

Set SW1-1 to ON for NTSC. Set it to OFF for PAL. The default setting is ON.

SW1-2: Line Sync

When multiple cameras are connected to the same switching device, vertical roll may occur on the monitor. AC line lock eliminates vertical roll by locking the frame rate to the power supply frequency. Each camera output is synchronized to the power supply frequency. Refer to Vertical Phase Adjustment on page 16 for more information.

Internal line sync disables line lock and synchronizes cameras internally.

Set SW-1 to ON to use AC line lock. Set it to OFF for internal line sync. The default setting is ON.

SW1-3: Interlaced Scanning/Progressive Scanning

Interlaced scanning is the standard for analog recording installations. Each frame contains one odd and one even field, and each are processed separately.

Progressive scanning is better for digital recording installations. Each frame is processed as a whole, which results in less blurring and cleaner digital conversion. It also saves storage space on digital video recorders.

Set SW1-3 to ON to select interlaced scanning. Set it to OFF to select progressive scanning. The default setting is ON.

C3429M-A (1/08) 13