Scope, Installation, Description | Pelco LK4800, LK6500

The information contained within this manual covers the LK4500, LK4800, LK6500 and LK7800 Lock Kits.

Installation should be in accordance with all applicable local and national electric codes, utilizing approved ma- terials only.

Please thoroughly familiarize yourself with the informa- tion in this manual prior to installation and operation.

2.0 DESCRIPTION

The Lock Kits:

LK4500 (for EH4500 and EH4600 enclosures) (CE), LK4800 (for EH4800 enclosures),

LK6500 (for EH6500 enclosures) and LK7800 (for EH7800 enclosures)

are designed to replace the existing 1/4-turn latch on the respective enclosure covers.

To install the lock kit, perform the following steps:

1.Unlatch the 1/4-turn latch and open the lid.

2.With a suitable wrench, loosen and remove the re- taining nut on the underside of the lid.

Note: The latch cam may be removed to im- prove clearance.

3.Remove the 1/4-turn latch from the enclosure cover.

4.Insert the lock body into the 3/4" hole in the dust cover.

5.Insert the lock/dust cover into the vacated latch hole. Be sure the cam operates in the proper direction.

6.Fasten the lock/dust cover to the lid with the retain- ing nut supplied.

7. Close the lid and be sure the lock operates properly.

8. Remove the key and close the dust cover.

PELCO • 300 W. Pontiac Way, Clovis, CA 93612-5699 • USA • (800) 289-9100 or (1-559) 292-1981

FAX (800) 289-9150 or (1-559) 292-3827 • DataFAX (800) 289-9108 or (1-559) 292-0435