Pelco Manual C2419M-A (5/00) 21
RESET CAMERA
Main Menu
<Camera>
<Line Sync>
<Power Up>
<Aux>
<Alarms, Zone Blank>
<Other>
EXIT
Camera Menu
Backlight comp Off
Zoom limit x- -
Reset camera
<Gain/AGC>
<Auto-iris>
<Next>
Exit

Resetting the camera returns the settings to their defaults.

Default Settings
Spectra II Spectra II
LowLight Color Monochrome
Backlight comp Off Off
Zoom limit X128/X176 X128
Gain/AGC
AGC mode Auto Auto
Gain 00
Auto-iris
Mode Auto Auto
Level 110 110
Peak 16 16
Low light limit 2N/A
Shutter speed Auto Auto
Auto focus mode Auto Auto
Auto sharpness On On
Sharpness 13 13
White balance
Auto white bal On N/A
R-B white bal No default N/A
M-G white bal No default N/A
When the camera is reset, the following settings are not changed: park time, auto flip
disable, limit stops, zoom limit, and proportional panning.
Turning off power to the Spectra II dome does not reset the camera. Camera settings are
retained in memory. When the power is turned back on, the settings will be the same as
they were when the power was turned off.
To reset the camera:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside Camera.
3. Press the Iris Open button to enter the Camera menu.
4. Position the cursor (>) beside Reset Camera.
5. Press the Iris Open button to reset the camera.