40 Pelco Manual C651M (7/99)9.1.2 Audio Playback
The letter “L” mode (L18H) is for audio recording and playback on the linear track.
Table H. Audio Playback Availability
Playback Mode 2H 6H L18H 72H 96H
Audio Playback Available Available Available Not Available Not Available
Picture Quality Good Good Vibrating Less Vibrating Less Vibrating
NOTES:
• There is normal sound playback
only when a tape recorded in 2H-
L18H modes is played back in its
respective mode.
• If a recording is played back in a
higher mode than that in which it
was recorded, the picture is
played back in slow motion. If
played back in a lower mode than
that in which it was recorded, the
picture is played back in fast mo-
tion.
• The picture may move up/down
or noise may occur when a tape
is played back in L18H, 72H, or
96H mode (even if the tape was
recorded in those modes).
9.1.3 End Of Tape
When the end of the tape is reached, the following functions are performed auto-
matically during playback or fast forwarding.
Table I. End Of Tape Actions
Tape End Selected REPEAT or ALARM•PROT STOP or REWIND
Playback The tape automatically rewinds Stop
to the beginning and stops.
Fast Forward Stop Stop
9.2 SPECIAL EFFECTS PLAYBACK
The VCR features the following convenient functions. Audio output is muted during
special effects playback.
9.2.1 Shuttle Ring
You can use the SHUTTLE ring to adjust the playback speed.
1. Press the PLAY button to begin playback.
2. Press the PAUSE/SHUTTLE HOLD button to get a still picture.
3. Turn the SHUTTLE ring to the appropriate angle for the playback speed you
want.
NOTES:
• Releasing the SHUTTLE ring re-
turns it to the center position and
resumes still mode.
• Pressing the PAUSE/SHUTTLE
HOLD button while turning and
holding the SHUTTLE ring (as in
step 3) continues the playback
speed you selected even though
the SHUTTLE ring is released.
Reverse high speed search
Reverse speed search
Reverse fast playback (x3)
Reverse playback
Reverse slow
Still
15(7)
9(5)
2
1/7
1/15
1/30
1/30
1/15
1/7
9(5)
15(7)
3
Slow playback
Normal playback
Fast playback (x2)
Forward speed search
Forward high speed search
( ) indicates the playback speed of the recorded tape in 2H mode.
Figure 26. Shuttle Ring Speed Settings