Pelco TLR3096 SET THE DAY AND TIME

34 Pelco Manual C672M (2/01)

SET THE DAY AND TIME

Keep the following in mind:

•You must set the day and time before performing timer programming.

•The year 2000 is shown as 00.

•The clock is in 24-hour format.

•The alarm recording counter appears only during alarm recording.

Do the following to set the day and time:

1. Press the MENU button to display the Main menu on the monitor.

2. Turn the JOG dial to select CLOCK/FIRST TIME SET UP, and then turn the SHUTTLE

ring right. The First Time Set Up menu appears.

3. Turn the JOG dial to select TIME DATE ADJUST, and turn the SHUTTLE ring right.

The Time Date Adjust menu appears.

4. Turn the JOG dial to set DAYLIGHT SAVINGS, and then turn the SHUTTLE ring right.

The daylight saving item flashes.

•When set to ON, the clock advances one hour.

•When set to AUTO, the clock advances one hour from the first Sunday in April (at

2 a.m.) to the last Sunday in October (at 3 a.m.). Remember: Programmed

recordings starting or ending in the daylight savings time changeover period may

not be recorded correctly.

•When set to ON or AUTO and the clock advances one hour, the daylight savings

time symbol ( ) is displayed next to the present time display. The daylight

savings time indicator (❚) is illuminated on the fluorescent display.

Daylight savings time may vary from the one above depending on your region or the

year. In this case, set DAYLIGHT SAVINGS to ON or OFF manually.

When DAYLIGHT SAVINGS is set to ON or OFF and there is no tape in the VCR, you

can toggle DAYLIGHT SAVINGS to ON and OFF on the VCR’s front panel by

simultaneously pressing the STOP and EJECT buttons.

5. Turn the JOG dial to set the month, and then turn the SHUTTLE ring right.

6. Set DAY, YEAR, and TIME the same way. Year digits can be set from 97 (for year

1997) to 27 (for 2027).

Do the following if you want to set the time to the exact second. Set the minute digits

one minute ahead of the time you are using as a reference. The digit on the right will

flash and the seconds digits stay at 00. Turn the SHUTTLE ring right when the time

reaches 00 seconds of the time you set. The time will begin counting from 00.Turn the

JOG dial to set the day, and then turn the SHUTTLE ring right.

7. Turn the SHUTTLE ring right while the 1-minute digit in TIME is flashing. Programming

is now complete. The First Time Set Up menu appears.

8. Press the MENU button. The day and time display appears.

00357

DISPLAY

TIMER PROGRAM

RECORDING SET UP

REAR TERMINAL

MAINTENANCE

CLOCK/FIRST TIME SET UP

Use JOG to select,

and ENTER.

Press MENU to exit.

00383

00358

DAYLIGHT SAVINGS OFF

MONTH 01

DAY 01

YEAR 2000

TIME 00:00:00

NOTE:

If power goes out

while daylight savings time

is selected, the power failure

mark “X” replaces the day-

light savings time symbol.

When the power failure

mark “X” disappears, the

daylight savings time sym-

bol reappears.

00359