Pelco WX8000 2.0 DESCRIPTION

2.0 DESCRIPTION

The Wiretron digital control system operates over a two-conductor cable and con-

trols CCTV equipment such as pan/tilts, enclosures, and motorized zoom lenses

from a remote location up to 10 miles (16 km) away.

Wiretron can be configured to control a single site or interfaced with Pelco video

switching equipment to provide a convenient video/control system with multiple

control sites and/or multiple camera sites.

The Wiretron control system provides up to 15 remote control functions:

1. Pan Left 9. Iris Open

2. Pan Right 10. Iris Close

3. Tilt Up 11. Auto/Manual Scan

4. Tilt Down 12. Aux 1 (Manual Iris)

5. Zoom In 13. Aux 2 (Auto Iris)

6. Zoom Out 14. Aux 3

7. Focus Near 15. Aux 4

8. Focus Far

Functions 1 through 10 are momentary; that is, they are actuated only while the

associated control switch is operated. Function 11 is latching; that is, auto scan

remains on until turned off. Aux 1, 2, 3, and 4 are low power outputs that may be

used to control such things as lights and gates. More auxiliary power output is

available when the controller is used with the AUX2000 Auxiliary Control Box. Aux

1-4 are jumper selectable for momentary/latching operation.

Functions 1 through 10 can be operated simultaneously. Functions 11 through 15

must be used individually, although any one of these functions may be used simul-

taneously with functions 1 through 10.

Wiretron provides the following standard functions on a single circuit board and

chassis with integral power supply:

1. Pan/tilt (24 VAC or 120 VAC as ordered from the factory)

2. Zoom lens–zoom, iris, focus with adjustable speed (speed not remotely con-

trollable)

3. Camera power (24 VAC or 120 VAC as ordered from the factory)

4. An open collector transistor output (latching) for use in the manual override of

an automatic iris control

Wiretron is designed to combat erroneous control and execution by providing the

following protective functions:

1. Simultaneous commands from two different sources are processed to ensure

that manual iris control cannot be inadvertently selected in place of automatic

control.

2. A sustained (20-to-40 second) illegal command condition results in the following:

a. Automatic iris

b. Manual pan

MPT8000CZ Desktop Wiretron transmitter/controller with pan/tilt joystick

and zoom lens control, 120 VAC input.

MPT8000CZ/220 Same as MPT8000CZ except 230 VAC input