Pella warranty Pella Corporation, Part Number 80WX0101, Double-Hung Frame Using Frame Screws

©2012 Pella Corporation Part Number: 80WX0101

WINDOW REPLACEMENT INSTRUCTIONS FOR CASEMENT, DOUBLE-HUNG AND CLAD FRAME WINDOWS INTO EXISTING

DOUBLE-HUNG FRAME USING FRAME SCREWS

These instructions were tested and developed for replacing windows in wood-frame wall construction systems designed to manage moisture. This method of installation involves removing the sash only of the existing window. The original window frame will remain in place and only the existing sash, exterior stops and frame hardware must be removed.

Installation recommendations for other types of wall construction, wall systems or conditions may be obtained from Pella Corporation or a local Pella retailer. Building designs, construction methods, building materials, and site conditions unique to your project may require an installation method different from these instructions and additional care on your part. Determining the appropriate installation method is the responsibility of you, your architect, or other construction professional.

YOU WILL NEED TO SUPPLY:

•Cedar or Impervious shims/spacers (12 to 20)

•Closed cell foam backer rod/sealant backer

(12 to 30 ft.)

• Pella® SmartFlash™ foil backed butyl window

and door flashing tape or equivalent

•Pella Window and Door Installation Sealant or equivalent high quality, multi-purpose sealant

(1 tube per window) SEALANT

•Low expansion, low pressure polyurethane insulating window and door foam sealant - DO

NOT use high pressure or latex foams

•#8 x 3-1/4" Finish head screws (6 to 10 per window)

•Pella replacement window sill adapter

Installation will require two or more persons for safety reasons.

REMEMBER TO USE APPROPRIATE

PERSONAL PROTECTIVE EQUIPMENT

CAUTION: Many windows in older homes are painted with lead-based paint. Removal of old windows may disturb this paint. Proper precautions must be taken to minimize exposure to dust and debris. Consult state or local authorities for more information.

TOOLS REQUIRED:

• Tape measure

• Level

• Sealant gun

•Prybar

•Utility knife

• Putty knife

• Hammer

• Screwdrivers (Flat & Phillips)

• Adjustable pliers

• Side Cuts

• Roto-tool, reciprocating saw

• Wood chisel

• 1/8" drill bit

• Drill

Sill Adapter

Flashing Tape

Always read the Pella® Limited Warranty before purchasing or installing Pella products. By installing this product, you are acknowledging that this Limited Warranty is part of the terms of the sale. Failure to comply with all Pella installation and maintenance instructions may void your Pella product warranty. See Limited Warranty for complete details at http://warranty.pella.com.