EXTERIOR FINISH OF ALUMINUM CLAD WINDOWS

The exterior frame and sash are protected by aluminum cladding with our tough EnduraClad® or EnduraClad Plus baked-on factory finish that requires no painting. Clean this surface with mild soap and water. Stubborn stains and deposits may be removed with mineral spirits. DO NOT use abrasives. DO NOT scrape or use tools that might damage the surface.

Use of inappropriate solvents, brickwash or cleaning chemicals will cause adverse reactions with window and door materials and voids the Limited Warranty.

INTERIOR FINISH

If products cannot be finished immediately, cover with clear plastic to protect from dirt, damage and moisture. Remove any construction residue before finishing. Sand all wood surfaces lightly with 180 grit or finer sandpaper. DO NOT use steel wool. BE CAREFUL NOT TO SCRATCH THE GLASS. Remove sanding dust.

Pella products must be finished per the below instructions; failure to follow these instructions voids the Limited Warranty.

•On casement and awnings, it is optional to paint, stain or finish the vertical and horizontal sash edges.

•On single-hungs and double-hungs, do not paint, stain or finish the vertical sash edges, any finish on the vertical sash edges may cause the sash to stick; it is optional to paint, stain or finish the horizontal sash edges.

•On patio doors, it is optional to paint, stain or finish the vertical and horizontal panel edges.

Note: To maintain proper product performance do not paint, finish or remove the weather- stripping, mohair dust pads, gaskets or vinyl parts. Air and water leakage will result if these parts are removed. After finishing, allow venting windows and doors to dry completely before closing them.

Pella Corporation is not responsible for interior paint and stain finish imperfections for any product that is not factory-applied by Pella Corporation. Use of inappropriate finishes, solvents, brickwash, or cleaning chemicals will cause adverse reactions with window and door materials and voids the Limited Warranty.

For additional information on finishing see the Pella Owner’s Manual or go to www.pella.com.

CARE AND MAINTENANCE

Care and maintenance information is available by contacting your local Pella retailer. This information is also available at www.pella.com.

IMPORTANT NOTICE

Because all construction must anticipate some water infiltration, it is important that the wall system be designed and constructed to properly manage moisture. Pella Corporation is not responsible for claims or damages caused by anticipated and unanticipated water infiltration; deficiencies in building design, construction and maintenance; failure to install Pella® products in accordance with Pella installation instructions; or the use of Pella products in wall systems which do not allow for proper management of moisture within the wall systems. The determination of the suitability of all building components, including the use of Pella products, as well as the design and installation of flashing and sealing systems are the responsibility of the Buyer or User, the architect, contractor, installer, or other construction professional and are not the responsibility of Pella.

Pella products should not be used in barrier wall systems which do not allow for proper management of moisture within the wall systems, such as barrier Exterior Insulation and Finish Systems, (EIFS) (also known as synthetic stucco) or other non-water managed systems. Except in the states of California, New Mexico, Arizona, Nevada, Utah, and Colorado, Pella makes no warranty of any kind and assumes no responsibility for Pella windows and doors installed in barrier wall systems. In the states listed above, the installation of Pella products in barrier wall or similar systems must be in accordance with Pella installation instructions.

Product modifications that are not approved by Pella Corporation will void the Limited Warranty.

Page 5 Page 7
Page 6
Image 6
Pella 80WX0101 warranty Exterior Finish of Aluminum Clad Windows, Interior Finish, Care and Maintenance Important Notice
Page 5 Page 7

80WX0101 specifications

The Pella 80WX0101 is a notable addition to the Pella family of windows, recognized for its innovative design and advanced features that cater to modern homeowners. This window model is specifically engineered to enhance energy efficiency, aesthetic appeal, and overall functionality, making it a popular choice for both new construction and renovation projects.

One of the main features of the Pella 80WX0101 is its energy efficiency. The window is equipped with triple-pane glass, which significantly reduces heat transfer and minimizes energy costs. This is complemented by an inert gas fill between the panes, further enhancing thermal performance. The frame is constructed using premium materials that feature a strong insulation value, ensuring that homes remain comfortable in varying weather conditions.

The aesthetics of the Pella 80WX0101 are equally impressive. Homeowners have a variety of design options to choose from, allowing them to find the perfect match for their home’s architecture. The window is available in multiple colors and finishes, alongside customizable grid patterns. This versatility enables it to blend seamlessly into both traditional and contemporary settings.

Pella has also integrated advanced technology into the 80WX0101 model. The window is designed with a patented Duracast frame, which is not only strong and durable but also resistant to fading, cracking, and warping. Additionally, the window features an advanced locking system that enhances security while providing ease of operation.

Another characteristic that sets the Pella 80WX0101 apart is its low maintenance requirements. The exterior finish is engineered to resist the elements, meaning homeowners can spend less time on upkeep and more time enjoying their spaces. Furthermore, the window comes with a limited lifetime warranty, providing peace of mind regarding its long-term performance.

In summary, the Pella 80WX0101 is an outstanding window option that offers exceptional energy efficiency, customizable aesthetics, advanced security features, and low maintenance needs. Its blend of technology and design makes it a suitable choice for those looking to enhance their home's value and comfort. As energy standards continue to evolve, the Pella 80WX0101 stands out as a forward-thinking solution in the window market, appealing to environmentally conscious consumers and those who appreciate quality and reliability in their home improvements.
Top Page Image Contents