Pella 80WX0101 warranty Lock Lever Removal And Insertion, B Interior Exterior

LOCK LEVER REMOVAL AND INSERTION

Note: You may want to remove the lock lever prior to finishing the window, or if it needs to be replaced with a lock lever in a different finish.

A.Unlock and open the window.

B.Place the lock lever in the locked position.

C.From the exterior of the window, insert a small flat-blade screwdriver between the cam and lock lever near the bottom of the opening between the stop and frame gasket.

D.Push the screwdriver inwards with a small amount of pressure; then turn the blade slightly clockwise for a left hand unit, counter-clockwise for a right hand units. DO NOT over-twist the screwdriver, this can damage the lock driver.

Note: This will release the hook in the lever from the cam hook.

E.Remove the lock lever by pulling it toward the interior of the building.

F.To install a lock lever, hold it in the lock position and insert it, from the interior, into the slot until it snaps into the cam.

BInterior

Exterior

E

D

Exterior C

F Interior