FINISHING INSTRUCTIONS

Paint or finish immediately after installation.

Note: DO NOT paint, stain or finish weather strip or vinyl parts! If paint, stain or finish gets on the weather stripping, wipe it off immediately with a damp cloth. To maintain proper product performance, do not remove weather strip, foam corner seal wedges or gaskets. Air and water leakage may result if these factory-installed items are removed. After finishing, allow doors to dry completely before closing them. Pella will not be responsible for finishing imperfections. The use of unapproved finishes, solvents or cleaning chemicals may cause adverse reactions with door materials. Pella will not be responsible for problems caused by the use of unapproved materials. If in doubt, contact your local retailer or representative.

Use of inappropriate finishes, solvents, brickwash or cleaning chemicals will cause adverse actions with window and door materials and voids the Limited Warranty.

Care and maintenance information is available in the Pella Owner’s Manual. You can obtain an owner’s manual by contacting your local Pella retailer. This information is also available on www.pella.com.

Factory Prefinished Panels: A door panel that has been prefinished with stain or paint from the factory requires no additional finishing. Clean the surface with mild soap and water. DO NOT use abrasives. DO NOT scrape or use tools that might damage the surface.

Clad Exterior Frame:

The exterior frame is protected by aluminum cladding with our tough EnduraClad® baked-on-factory finish that needs no painting. Clean this surface with mild soap and water. DO NOT use abrasives. DO NOT scrape or use tools that might damage the surface.

Panel Cleaning and Prep Instructions for Unfinished or Primed Panels: Dry wipe dust from doors gently. Examine door for possible smudges or fingerprints made from normal handling or construction. To remove smudges, lightly wipe surface with warm water. DO NOT sand surface of fiberglass panel. Scuff sand with light grade sand paper or abrasive pad (220 grit or higher). Rinse surface with mineral spirits for fiberglass panels and warm water for steel panels. Let door and sidelight surfaces dry completely before applying finish. Finish the door panels as soon as possible after installation.

Staining fiberglass panels or unfinished interior frame members:

Fiberglass door and sidelight panels may be stained with a gel stain if a wood look is desired. Pella offers stain kits in a variety of colors. Apply and finish per the stain kit manufacturer’s instruction. Ensure that all exposed panel edges are finished to minimize the chance of damage. Unprimed interior frame parts may be stained with wood stains and should be finished with a minimum of two coats of a clear polyurethane finish. DO NOT bridge the top coat between the outer edge of the glazing frame and the door panel.

Note: The fiberglass base color tone will vary. This variance is normal and will not impact the stain color of the door.

Page 14 Page 16
Page 15
Image 15
Pella 818T0101 Finishing Instructions, Paint or finish immediately after installation, Clad Exterior Frame
Page 14 Page 16

818T0101 specifications

The Pella 818T0101 is a testament to advanced window technology, designed to enhance both aesthetics and energy efficiency for modern homes. As a part of Pella's robust offering, this window model provides consumers with a blend of style, durability, and innovative features that cater to various architectural needs.

One of the standout characteristics of the Pella 818T0101 is its exceptional energy efficiency. The window is designed with advanced insulation technology, minimizing heat loss in winter and heat gain in summer. This efficiency is largely attributed to its dual-pane glass construction, which is filled with Argon gas and coated with Low-E glass. This Low-E coating reflects infrared heat while allowing visible light to enter, ensuring that homes remain comfortable year-round while also reducing reliance on heating and cooling systems.

The Pella 818T0101 also embraces the importance of durability. Constructed with high-quality materials, including a strong vinyl frame, this window model is designed to withstand the challenges of varying weather conditions. The frame is resistant to warping and fading, ensuring that its aesthetic appeal remains intact over time. Additionally, the window is equipped with a fusion-welded frame and sash, enhancing its integrity and strength.

Aesthetically, the Pella 818T0101 offers customizability to suit different home designs. It is available in a variety of styles, colors, and finishes, enabling homeowners to match the window with their interior and exterior decor seamlessly. The option for grilles between the glass adds a classic touch that many homeowners appreciate, offering the look of divided lights without the added upkeep.

Furthermore, the Pella 818T0101 prioritizes ease of use and maintenance. It features advanced locking mechanisms for improved security and operable designs for easy cleaning from inside the home. These features reflect a deep understanding of homeowners' needs and preferences.

In summary, the Pella 818T0101 is a remarkable window model that combines energy efficiency, durability, and aesthetic appeal. Its cutting-edge technologies, including dual-pane glass with Low-E coating, ensure optimal performance, while its customizable options allow homeowners to personalize their living spaces. Whether looking to increase energy efficiency or enhance curbs appeal, the Pella 818T0101 represents a solid investment for modern homes.
Top Page Image Contents