Pentair 4/100, 4/160 External Control, Terminal number, Phase type, Frequency

9

External Control with IntelliComm Communication Center

The IntelliFlo 4 can be remotely controlled by the Pentair IntelliComm Communication Center using an optional communications cable (P/N 350122). The IntelliComm provides four pairs of input terminal connections. These inputs are actuated by either 15 - 240 VAC or 15 - 100 VDC. Using the device's inputs, the programmed IntelliFlo 4 pump speeds can be controlled.

If more than one input is active the highest number will be communicated to the IntelliFlo pump. The IntelliComm will always communicate to pump address 1.

The following table shows the wiring terminal descriptions for IntelliComm.

External Control

					Terminals
		IntelliComm Communication Center
Terminal number	Terminal name	Voltage	Maximum	Phase type		Frequency
			current
1-2	Power supply	100 - 240 VAC	100 mA	1 Input		50/60 Hz
		15 -240 VAC
3-4	Program 1	or	1 mA*	1 Input		50/60 Hz
		15 - 100 VDC
		15 -240 VAC
5-6	Program 2	or	1 mA*	1 Input		50/60 Hz
		15 - 100 VDC
		15 -240 VAC
7-8	Program 3	or	1 mA*	1 Input		50/60 Hz
		15 - 100 VDC
		15 -240 VAC
9-10	Program 4	or	1 mA*	1 Input		50/60 Hz
		15 - 100 VDC
	RS-485
11	+ Data: Yellow	-5 to +5 VDC	5 mA	1 Output		N/A
12	- Data: Green
	Ground

IntelliFlo 4 Installation and User’s Guide