Pentair CP-2000 System Options, TWO Speed Pump Control, SPA Waterfall Control, Freeze Protection

"PROG 3 will now appear on the r~ghtof the Display. This indicates that the third

program step is ready to be entered.	r				9
Enter the third program time (12:OO pm) by
	TlME CONTROL
pushing the HOURS and MINUTES Buttons
Pay special attention to the AM/PM indicator.
In our example, at 12:OO pm the filter pump
and pool cleaner should turn off.
Make sure that "OFF' is displayedabove each					MINUTES
Equipment Button.	FILTER	CLMR	SPA	AUXI
You have now completed the third program step
Push PROGRAM Button to lock-in the program.	+
					I
"PROG 4 will now appear on the right of the Display. This indicates that the fourth
program step is ready to be entered.	#				4
Enter the fourth program time (6:30 pm) by
	TlME CONTROL
pushing the HOURS and MINUTES Buttons.
In our example, at 6:30 pm the spa and
auxiliary 1 (spa light) should turn on.
Push SPA Equipment Button.
" O N should appear directly above the SPA	R U I R	C U R	SPA	AUXt
and FILTER Buttons.
Push AUXl Equipment Button.
"ON'should appear above AUXl Button
You have now completed the fourth program					I
step.
Push PROGRAM Button to lock-in the program.
"PROG 5" will now appear on the right of the Display. This indicates that the fifth
program step is ready to be entered.	#				9
Enter the fifth program time (8:OO pm) by
	TlME CONTROL
pushing the HOURSand MINUTES Buttons.
In our example, we would like to turn off the
spa at 8:00 pm, but the spa light (AUX 1)					---•
should still be on.	CfF	OFF	OFF
Push AUX 1 Equipment Button.
"ON" will appear above AUXl Button.	RLTSR	CLWR	SPA	A U X I
You have now completed the fifth program step.
Push PROGRAM Button to lock in the program .					I
	.				9
"PROG 6 will now appear on the right of the Display. This indicates that the sixth
program step is ready to be entered.
Enter the sixth program time (10:OO pm) by	TIME CONTROL
pushing the HOURS and MINUTES Buttons.
In our example, all of the equipment should be
turned off at 10:OO pm.
Therefore, make sure that "OFF'is displayed
above all of the Equipment Buttons.	R U I I	CU	SPA	AUX1
To lock-in the program and return Clock to
Time Mode, simply push the PROGRAM
Button once.	\
If this is forgotten, the Clock will automatically					I

return to Time Mode after two minutes.

SYSTEM OPTIONS

TWO SPEED PUMP CONTROL :

If your system incorporates a Two Speed Filter Pump, the CP-2000 has been designed to provide you with the maximum energy-efficient usage of this feature.

Although your Pool Builder may have adjusted the two speed control circuitry to your specific requirements, the CP-2000 typically switches the pump to high speed under any of the following conditions:

1.For two minutes when the filter is first turned on. This features establishes proper flow through the system, and packs the filter grids. After two minutes, the pump will automatically switch to low speed.

2.Whenever the pool cleaner is running. This provides sufficient flow for the pool cleaner to operate effectively.

3.During spa operation to increase the jet action.

4.Whenever the heater is on. This feature will conserve energy by bringing your pool and spa up to the desired temperature more quickly.

5.Whenever your solar system is operating. This provides high flow rate through your solar panels, which ensures the most efficient usage of the available solar energy.

SPA WATERFALL CONTROL :

If your spa water level is elevated above that of the pool, your Pool Builder may have included a Spa Waterfall Control (model RLY-WRFL).

With this feature, you can circulate the pool water back to the spa, creating an overflow (waterfall effect) from the spa to the pool. This effect will cease during spa circulation. Depending upon which circuit has been used to connect the Spa Waterfall Control, either the AUX1. AUX2 or AUX3 Button will activate this feature.

FREEZE PROTECTION :

Recirculating Freeze Sensors (model FPSC) may have been added to your system. These Sensors protect the plumbing and equipment from possible freeze damage by running the filter pump whenever the temperature falls to approximately 41" F.

Similarly, Auxiliary Pump Freeze Sensors (model FPSAUX) may have been added to activate auxiliary equipment (such as a fountain or jet pump) during freezing conditions.

CAUTION : Freeze Sensors will not provide circulation of water through your solar panels. Solar freeze protection must be accomplished by draining the panels. (See below).

SOLAR PANEL DRAINDOWN :

If your control system incorporates solar heating, it is advisable that a draindown feature be included to protect the solar panels against potential freeze damage.

For conventional solar systems which permit gravity drainage of panels, the Compool Solar Valve with built-in check valve (model SOL-2T) will automatically drain the panels whenever the solar turns off and the filter pump is not running.

For solar systems with glazed panels. damage can occur from overheating if the solar turns off and the filter pumw is still running.

In this instance, a motorized Draindown Valve (model HW-5B) should be plumbed at the solar feed line. This will automatically drain the panels whenever the solar is turned off, even if the filter pump is still running.

This feature may also be incorporated if your solar system does not facilitate gravity drainage of panels, or where panels are located below pool water level.

Consult your Solar Company for more details.