Pentair S7D75, S8D110 Read And Follow Safety Instructions, to the potential for personal injury

Models: S7D75 S8D110

1 16
Download 16 pages 58.08 Kb
Page 3
Image 3
READ AND FOLLOW SAFETY INSTRUCTIONS!

READ AND FOLLOW SAFETY INSTRUCTIONS!

This is the safety alert symbol. When you see this symbol on your filter or in this manual, look for one of the following signal words and be alert

to the potential for personal injury.

to the potential for personal injury.Before pressure testing, make the following safety checks:Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background warns about hazards that will cause death, serious personal in- jury, or major property damage if ignored.

Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background warns about hazards that can cause death, serious personal in- jury, or major property damage if ignored.

Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background warns about hazards that will or can cause minor personal injury or property damage if ignored.

NOTICE indicates special instructions not related to hazards.

Carefully read and follow all safety instructions in this manual and on equip- ment. Keep safety labels in good condition; replace if missing or damaged.

Manual background Incorrectly installed or tested equipment may fail, causing severe injury or property damage. Read and follow instructions

in owner's manual when installing and operating equipment. Have a trained pool professional perform all pressure tests.

1.Do not connect system to a high pressure or city water system.

2.Use equipment only in a pool or spa installation.

3.Trapped air in system can cause explosion. BE SURE all air is out of system before operating or testing equipment.

Before pressure testing, make the following safety checks:

Check all clamps, bolts, lids, and system accessories before testing.

Release all air in system before testing.

Tighten Sta-Rite pump trap lids to 30 ft. lbs. (4.1 kg-cm) torque for testing.

Water pressure for test must be less than 25 PSI (172 kPa).

Water Temperature for test must be less than 100o F. (38o C).

Limit test to 24 hours. After test, visually check system to be sure it is ready for operation. Remove pump trap lid and retighten hand tight only.

NOTICE: These parameters apply to Sta-Rite equipment only. For non-Sta-Rite equipment, consult equipment manufacturer.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BEFORE WORKING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ON FILTER:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If filter clamps are

1.

Stop pump.

 

 

 

 

adjusted or removed

 

 

 

2.

Open air release

 

 

 

 

 

under pressure,

 

 

 

 

 

 

 

 

 

 

 

 

valve.

 

 

 

 

 

tank may explode,

 

 

 

 

 

 

 

 

 

 

 

 

3.

Release all pressure

 

 

 

 

 

causing severe injury or

 

 

 

 

 

 

 

 

major property damage.

 

 

 

 

from system.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BEFORE WORKING

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ON PUMP OR MOTOR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Filter pumps require

Disconnect power

 

 

 

 

 

hazardous voltage

 

 

 

to motor at main

 

 

 

 

 

 

which can shock, burn,

 

 

 

circuit breaker.

 

 

 

 

 

 

or cause death.

 

 

 

Discharge motor

 

 

 

 

 

 

 

 

 

 

 

capacitor to ground.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Page 3
Image 3
Pentair S7D75, S8D110 owner manual Read And Follow Safety Instructions, to the potential for personal injury