3 TakingPictures

Saving the Settings (Memory)

The Memory function is for saving the current camera settings when the camera is turned off.

For some camera settings, the Memory function is always set to O(On) (the settings are saved when the camera is turned off), while for others you can choose Oor P(Off) (to choose whether the settings are saved or not when the camera is turned off). The items which can be set to O or P in the Memory function are shown in the table below. (Items not listed here are always saved in the selected settings when the camera is turned off.)

If you select O, the settings will be saved in the status they were in immediately before the camera was turned off. If you select P, the settings will be reset to the defaults when the camera is turned off. The table below also shows whether the Memory default setting for each item is O or P.

Item

Description

Default

Page

Setting

Flash Mode

The flash mode set with the four-way controller (4)

O

p.97

 

 

 

p.90

Drive Mode

The drive mode set with the four-way controller (2)

P

p.92

p.93

 

 

 

p.95

Focus Mode

The focus mode set with the four-way controller (5)

P

p.99

Zoom Position

The zoom position set with the zoom lever

P

p.74

MF Position

The manual focus position set with the four-way

P

p.100

controller (23)

 

 

 

White Balance

The [White Balance] setting on the [A Rec.Mode]

P

p.105

 

menu

 

 

Sensitivity

The [Sensitivity] setting on the [A Rec.Mode] menu

P

p.109

EV

The [EV Compensation] setting on the

P

p.107

Compensation

[A Rec.Mode] menu

 

 

Face Detection

The [Face Detection] setting on the [A Rec. Mode]

P

p.117

menu

Digital Zoom

The [Digital Zoom] setting on the [A Rec.Mode]

O

p.76

menu

 

 

 

DISPLAY

The information display mode set with the

P

p.20

4/Wbutton

 

 

 

File No.

If a new SD Memory Card is inserted when On has

O

—

been selected, file numbers are assigned sequentially.

128