Write-protect switch

Cleaning Your Camera

•Do not clean the product with organic solvents such as thinner, alcohol or benzine.

•Use a lens brush to remove dust accumulated on the lens. Never use a spray blower for cleaning as it may damage the lens.

Storing Your Camera

•Do not store the camera with preservatives or chemicals. Storage in high temperatures and high humidity can cause mold to grow on the camera. Remove the camera from its case and store it in a dry and well-ventilated location.

•Avoid using or storing the card where it may be exposed to static electricity or electrical interference.

•Avoid using or storing the card in direct sunlight or where it may be exposed to rapid changes in temperature or to condensation.

•Periodic inspections are recommended every one to two years to maintain high performance.

Other Precautions

•Please note that deleting data, or formatting the SD Memory Cards or the built-in memory does not completely erase the original data. Deleted files can sometimes be recovered using commercially available software. It is user’s responsibility to ensure the privacy of such data.

•The SD Memory Card is equipped with a write-protect switch. Setting the switch to

LOCK prevents new data from being recorded on the card, the stored data from being deleted, and the card from being formatted by the camera or computer. rappears on the display when the card is write-protected.

•Care should be taken when removing the SD Memory Card immediately after using the camera, as the card may be hot.

•Keep the battery/card cover closed and do not remove the SD Memory Card or turn the camera off while the data is being played back or saved to the card, or the camera is connected to a computer with the USB cable, as this may cause the data to be lost or the card to be damaged.

6