4 Use the four-way controller (23) to select [Pixel Mapping].

Pixel Mapping

Checks the image sensor

and corrects defective

pixels

Pixel Mapping

Cancel

OK OK

5 Press the 4button.

Defective pixels are mapped and corrected.

When the battery level is low, [Not enough battery power remaining to activate Pixel Mapping] is displayed on the monitor. Use the AC adapter kit K-AC122 (optional) or load a fully charged battery.

Resetting to Default Settings (Reset)

You can reset the camera settings to their defaults. Refer to “Default Settings” (p.216) for the reset settings.

1 Press the 3button in Q mode.

The [WSetting] menu appears.

When you press the 3button in A mode, press the four-way controller (5) twice.

6 Settings

2 Use the four-way controller (23) to select [Reset].

 

Setting

2/3

Video Out

NTSC

Brightness Level

 

Power Saving

5sec.

Auto Power Off

3min.

 

Reset

 

 

Delete all

 

 

 

 

 

MENU ECxiantcel

 

3 Press the four-way controller (5).

The [Reset] screen appears.

191