106

4

Functions Shooting

AF Adjustment

You can adjust the AF focusing position with [35. AF Adjustment] in the [A Custom Setting] menu.

• Be sure to use AF Adjustment only when necessary. Care should be taken as adjusting the autofocus may make it difficult to capture images with the appropriate focus.

•Any camera shake during test shooting for focus adjustment may make it difficult to obtain the accurate focusing position. Therefore, always use a tripod when taking test shots.

1 Select [35. AF Adjustment] in the [A Custom Setting] menu and press the four-way controller (5).

2Press the four-way controller (23) to select [On] and press the four-way controller (5).

The AF Adjustment screen appears.

3 Use the four-way controller (23) to select [Apply All] or [Apply One].

Apply All Applies the same adjustment value to all lenses.

Apply One The lens ID is displayed when obtained. Saves and applies an adjustment value for each lens type. (Up to 20 lens types)

4 Press the four-way controller (5) and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

adjust the value with the rear e-dial or

 

35. AF Adjustment

 

 

 

 

 

 

 

 

 

 

 

 

 

the four-way controller (45).

 

 

Apply All

 

+5

 

 

)

 

 

 

 

 

 

 

 

 

5

 

Apply One

Unset

Press the four-way controller (

 

 

 

 

 

 

 

 

 

(rear e-dial y) to adjust the focus to a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

closer position and press the four-way

 

 

 

 

 

 

 

 

 

controller (4) (rear e-dial f) to adjust

 

Reset

 

 

 

 

 

 

 

 

 

 

 

 

 

the focus to a farther position.

 

 

MENU Cancel

OK Save

5Press the 4 button.

6 Press the 4 button.

The camera returns to the Capture mode.

7 Take a test picture.

You can check the focusing position by enlarging the image during Live View (p.114) or Digital Preview (p.115).

• Press the Green button in Step 4 to set the adjustment value to ±0.

•If an adjustment value has been saved using Apply One and you press the 4 button with [Apply All] selected in Step 6, the Apply All value is used instead of the Apply One value.

•To reset a saved adjustment value, select [Reset] on the AF Adjustment screen in Step 3. (p.241)