118

4

Functions Shooting

4Press the four-way controller (3) and use the four-way controller (45) to select g or h.

5Press the 4 button.

The camera is ready to take pictures continuously.

6Press the shutter release button halfway.

The autofocus system operates. The focus indicator ] appears in the viewfinder when focused.

7Press the shutter release button fully.

Pictures are taken continuously while the shutter release button is fully pressed. Take your finger off the shutter release button to stop.

• If the focus mode is set to l (Single mode), focus is locked on the first focus position and pictures are taken at the set interval.

•Focusing is continuously active during continuous shooting when the focus mode is set to k (Continuous mode).

•The shutter cannot be released until charging is complete when using the

built-in flash. You can set the camera to enable shutter release before the built-in flash is ready in the [A Custom Setting] menu. (p.137)

•You can also use the remote control for continuous shooting. (p.125)

•Select a setting other than gh in the Drive Mode options screen to cancel continuous shooting. The setting is canceled when the camera is turned off if [Drive Mode] in [Memory] of the [A Rec. Mode] menu (p.236) is set to P (Off).