126

5

Press the four-way controller (3) and use the four-way controller (45) to select h, i, or i.

The self-timer lamp will blink to let you know that the camera is in remote control wait status.

Drive Mode

Remote Control Unit

OK OK

4

Functions Shooting

6

7

8

Press the 4 button.

The camera is ready to take a picture.

Press the shutter release button halfway.

The autofocus system operates. The focus indicator ] appears in the viewfinder when focused.

You cannot focus with the remote control unit in default settings. Focus on the subject first before operating with the remote control. You can set [AF in remote control] to [On] in the [A Custom Setting] menu. (p.74)

Point the remote control unit

 

towards the remote control receiver

5 m

on the front or back of the camera

 

and press the shutter release button

 

on the remote control.

 

The operating distance of the remote

 

control unit is about 5 m from the front or

 

back of the camera.

5 m

For h, the shutter will be released

immediately after the shutter release

 

button is pressed.

 

For i, the shutter will be released in three seconds after the shutter release button is pressed.

After the picture is taken, the self-timer lamp lights for 2 seconds and then returns to blinking.

For i, continuous shooting starts immediately after the shutter release button is pressed. To exit continuous shooting, press the shutter release button on the remote control unit again.