1Select [Dust Alert] in the [R Set- up] menu.

253

 

 

 

Set-up

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Auto Power Off

1min

 

 

Folder Name

Date

 

 

File Name

IMGP

 

 

Select battery

 

 

 

 

Pixel Mapping

 

 

 

 

Dust Alert

 

 

 

 

MENU Cancel

3/4

 

 

 

 

 

 

 

 

2Press the four-way controller (5).

3Point the lens at a white wall or

other uniform surface and press the shutter release button fully.

After image processing is performed, the

Dust Alert screen appears.

x1

OK Exit

4Press the 4 button.

The image is saved and Dust Alert is exited.

•The exposure time may be extremely long when using the Dust Alert function. Note that if the direction of the lens is changed before processing is complete, dust will not be detected properly.

•The Dust Alert image can only be displayed during sensor cleaning within 30 minutes from the time the image is saved. If 30 minutes elapse, save a new Dust Alert image and then perform sensor cleaning.

•The saved Dust Alert image cannot be displayed in Playback mode.

•Dust Alert image cannot be saved when an SD Memory Card is not inserted.

•If [NG] is displayed in Step 3 and the camera is unable to detect dust, press the 4 button and take another picture.

•Regardless of the camera settings, a picture will be taken with specific shooting conditions in Step 3.

•When using a lens with an aperture ring, make sure the aperture ring is set to the s position.

•Press the M button or turn the rear e-dial when displaying the Dust Alert image to view it at full screen display.

12

Appendix