Using Built-in Flash

1 Press the K button.

The built-in flash pops up and begins charging. When the flash is fully charged, E appears in the LCD panel and viewfinder.

(p.27, p.29)

2Press the shutter release button halfway.

The focus indicator ] appears in the viewfinder when focused.

3Press the shutter release button fully.

The picture is taken.

•When the mode dial is at B, the flash is not discharged when the lighting conditions do not require flash for correction even if the flash is popped up.

•The Flash On is used when the flash is popped up if the mode dial is at a setting other than B.

4Push down on the portion indicated in the illustration to

retract the flash.

63

3

Operations Basic