1 GettingStarted
• Precautions when using an SD Memory Card / MultiMediaCard
• Make sure the camera is turned off before opening the battery/card cover.
• The SD Memory Card has a
•SD Memory Cards/MultiMedia Cards formatted on a PC or device other than the camera cannot be used. Be sure to format the card with the camera.
•The SD Memory Card / MultiMediaCard may be hot when removed immediately after camera use. Please be careful.
•Do not remove the card or turn off the camera when
recording data or playing back images or audio from the SD Memory Card / MultiMediaCard, or when connected to a PC with the USB cable. This could cause data loss or card damage.
•Do not bend the SD Memory Card / MultiMediaCard or subject it to violent impact. Do not get it wet or leave it in a high temperature location.
•New cards or cards used in another camera must be formatted before use. For more information about formatting the card, see “Formatting an SD Memory Card / MultiMediaCard” (p.90).
•Do not remove the SD Memory Card / MultiMediaCard while the card is being formatted. The card may be damaged and become unusable.
•Data stored on an SD Memory Card / MultiMediaCard may be erased under the following conditions. PENTAX does not accept any liability regarding erased data.
•When the user mishandles the SD Memory Card / MultiMediaCard
•When the SD Memory Card / MultiMediaCard is placed in a location with static electricity or electrical interference
•When the card is not used for a long time
•When the card, the AC adapter, or battery is removed while recording or reading data on the SD Memory Card / MultiMediaCard
•The SD Memory Card / MultiMediaCard has a finite operating life. The stored data may become unreadable after long periods of disuse. Please periodically backup important data onto your PC.
•Please avoid using or storing your card where static electricity or electrical interference can occur.
•Do not use or store your card where it may be exposed to sudden temperature changes, condensation, or direct sunlight.
18