4
5
46
TakingPictures 7
1.Press the
23are displayed above and below the number of minutes.
2.Use the
23are displayed above and below the number of seconds.
3.Use the
4.Press the
The frame will move to [Number of shot].
Use the
The frame will move to [Start Time].
Set the time to start shooting.1.Press the
23are displayed above and below the number of hours.
2.Use the
23are displayed above and below the number of minutes.
3.Use the
Playing Back Still Pictures1p.26
•Interval shooting can be set at intervals of 10 seconds to 4 minutes in units of 1 second, and intervals of 4 minutes to 99 minutes in units of 1 minute. Intervals of less than 10 seconds cannot be set.
•The number of pictures can be set in the range of 2 to 99 pictures.
•The start time can be set between 0 minutes and 23 hours 59 minutes in units of 1 minute.
•If the start time is set to 0 minutes, the first picture will be taken as soon as the shutter release button is pressed.
•If you press the power switch on during standby, the remaining number of pictures and interval time will be displayed on the LCD monitor. If you press the MENU button, the message “Stop interval shooting?” will be displayed. To cancel interval shooting, press the OK button.
•If the SD Memory Card / MultiMediaCard runs out of memory, interval shooting stops and the camera turns off automatically.
Interval shooting is not possible in Movie Picture or Panorama Assist mode.
58